Instructions for Eye Contact: Immediately flush eyes with large amounts of water. Get immediate medical
attention.
Instructions for Skin Contact: Flush skin with large amounts of water. If irritation persists, get medical
attention.
Instructions for Inhalation: Remove person to fresh air. If not breathing, give artificial respiration.
If breathing is difficult, get immediate medical attention.
Instructions for Ingestion: If swallowed, call a physician immediately. Only induce vomiting at the
instruction of a physician. Never give anything by mouth to anunconscious person.
Flash point:
Approximately -20 C OC ASTM D92
Lower Explosive Limit (%):
Approximately 1 % calculated
Upper Explosive Limit (%):
Approximately 6 % calculated
Autoignition temperature:
Not available
Suitable Extinguishing Media: Water spray; Carbon Dioxide; Dry chemical; Foam
Exposure Hazards during Fire: Vapors may travel long distances along the ground or floor to an ignition
source and flash back.
Combustion Products from Fire: Carbon monoxide and carbon dioxide
Fire Fighting Procedures: Wear full protective clothing, including helmet, self-contained, positive pressure
or pressure demand breathing apparatus, bunker coat and pants, bands around arms, waist and legs, face
mask, and protective covering for exposed areas of the head. Water may not effectively extinguish fire;
however, it should be used to keep fire-exposed containers and surfaces cool and prevent explosive rupture.
Personal Precautions: Refer to other sections of this MSDS for information regarding physical and health
hazards, respiratory protection, ventilation, and personal protective equipment.
Spill Response: Ventilate area. Extinguish all ignition sources. Contain spill. Evacuate unprotected person-
nel from hazard area. Cover with absorbent material. Cover spill area with Light Water Brand or other ATC
foam. (For further information on ATC foam usage, contact 3M Fire Protection Systems.) Collect using
non-sparking tools. Clean up residue. Place in an approved metal container. Seal the container.
Methods for Disposal: Incinerate in a permitted hazardous waste incinerator. Combustion products will
include HCl.
Storage Requirements: Keep container closed when not in use.
Incompatible Materials: Store away from heat. Sparks and/or Flames
Fire Prevention: No smoking while handling this material.
Explosion Prevention: Flammable liquid and vapor. Keep away from heat, sparks, open flame, and other
sources of ignition.
Static Prevention: Avoid static discharge.
Use Instructions: Keep container tightly closed. For industrial or professional use only.
SECTION 4: FIRST AID MEASURES
SECTION 5: FIRE FIGHTING MEASURES
SECTION 6: ACCIDENTAL RELEASE MEASURES
SECTION 7: HANDLING AND STORAGE